Diy Rolling Work Bench
Diy rolling work bench is bookmark about Uncategorized bookmarked by edwin with ID 1697298068 was uploaded on 01-01-2019 and has been viewed 527 times.
DIY Rolling Work BenchWelcome to DIYPete.com and thanks for stopping by! In this tutorial we'll walk through the process of building a rolling work bench.The work bench tutorial, video, and free work bench plans will give you everything you need to build your own.
The work bench will provide you with a flat surface to build all your projects.It has locking caster wheels to move it around the shop and is strong enough to build concrete counters on.Have fun with the project! Tools: Miter Saw- I'd recommend a 12 inch sliding, miter sawCircular SawDrillAnd/OR Impact DriverOrbital Sander- Ryobi makes a nice one.
( 220 grit sandpaper )Tape Measure, Straight Edge, PencilSanding Block with 600-800 grit sandpaperPaint Brush, RagSpeed SquareClamps (optional) Safety EquipmentDust MaskRespiratorEye ProtectionEar ProtectionHearing ProtectionRubber Gloves Attach the plywood table top Use 2 inch wood screws to attach the plywood to the 2×4 boards.
Add the legs Connect each 4×4 corner leg to the outer frame with 3 1/2 inch wood screws.Connect the support boards Space the support boards evenly and attach from the outside frame with wood screws.Build the lower shelf Use a circular saw to cut out the lower shelf.
Then cut out notches on two of the corners with a jigsaw.Attach lower shelf Attach...