Sliding Hold Down
Sliding hold down is bookmark about Shop Projects bookmarked by william with ID 11046217494 was uploaded on 27-01-2019 and has been viewed 313,341 times.
SHOP PROJECTS / JIGS & FIXTURESSHOP PROJECTS / TABLE SAWSliding Hold-DownPreviousNext Cutting narrow or thin stock can be a challenge.This clever jig makes it easier and safer.When ripping narrow strips or cutting a rabbet along the edge of a workpiece, it's sometimes hard to keep the board flat against the saw table.
And if you use a featherboard, it can get in the way.The handy sliding hold-down jig you see here solves these problems.Keith Krueger of Bellefontaine, Ohio, sent us the prototype for this jig, and I'll admit it's a clever idea.
What's really unique is how the featherboard actually slides with the workpiece at the end of the cut, maintaining pressure on the workpiece.The secret to this is in the drawer slides hidden inside.And the photo at left shows how the featherboard carriage is held stationary with a pivoting catch until the push block releases it.
Then the top of the carriage (and the featherboard) moves with the workpiece through the cut.SELECT YOUR PLAN PACKAGEUnit Imperial $9.95Learn more Metric (unavailable) Learn more ADD TO CART What You Get:6 pages of step-by-step instructions20 full-color photos, illustrations and exploded viewsShop-tested tips...