Canadian Provincial Capitals Scroll Saw Patterns
canadian provincial capitals scroll saw patterns is article about Magazine bookmarked by eduardo with ID 13298927554 was uploaded on 17-02-2019 and has been viewed 365,036 times.
Edmonton Illustration by Marcus Cutler Here is the second pattern in our "Canadian Cities Skyline" series.You can either photocopy the pattern and enlarge it to the size you want, or scan and print it out.
Spray glue the pattern onto a piece of ¼" Baltic birch plywood, which is stable and strong, so fragile areas will not easily break off.Cover the plywood with masking tape first, otherwise the glue will get into the grain of the wood and you will have problems applying your finish.
Cut out shaded area of the illustration.A #5 13 t.p.i.blade will give a nice smooth cut on plywood.Always start cutting out pieces with the smallest area (in this pattern the areas around the shield in the bottom), so the larger areas will support the smaller areas while you are cutting.
Then move on to the next larger area, leaving the largest areas to the last.Finish the project with your favourite wood finish.A clear coat polyurethane or lacquer are good choices.You might want to lay the project on a piece of black (or other coloured) bristol board, trace around the project, and then cut the bristle board out and glue...