Easy Project Here Is A Great Little Project For You And The Younger Woodworker In Your Family To Make Together In A Weekend You Can Use A Table Saw And Mitre Sled To Cut The Parts Do The Shaping On A Router Table And Then Turn The Pieces Over To Your Assistant To Assemble
Easy project here is a great little project for you and the younger woodworker in your family to make together in a weekend you can use a table saw and mitre sled to cut the parts do the shaping on a router table and then turn the pieces over to your assistant to assemble is article about Magazine bookmarked by alvin with ID 12503516782 was uploaded on 11-02-2019 and has been viewed 90,153 times.
Tiny Toy Box Illustration by Mike Del Rizzo I used the Dowelmax jig and a cordless drill on this project.This is a very safe system, and allows interested children to participate in some quality time in the shop, under your supervision.
You can, of course, use a different model of doweling jig.This project was made using finger-jointed laminated pine shelf panels.The ones that my supplier had on hand were ⅝" thick; if yours are of a different thickness, adjust the length of the ends (B) accordingly.
I also used the Dowelmax without the shim normally used with the ¼" bushings to give me the recessed ends.With careful planning you can cut all the pieces for this project from a single 12" x 8' board, or two 12" x 6' boards.
The Box• Cut the top (A) to size from the shelf stock.If you are not using laminated shelf panels then you will need to glue up enough stock for the pieces.Set the top aside for now.• Cut the pieces for the ends (B) and the front and back (C) to size.
• Set the ends in place and then decide which of the other two panels will become the front....