Easy Project Accent Mirrors Add To Your Decor By Brightening Up A Wall That Would Otherwise Be Stark This Little Mirror With Its Wagon Wheel Theme Can Do Just That In Your Home
Easy project accent mirrors add to your decor by brightening up a wall that would otherwise be stark this little mirror with its wagon wheel theme can do just that in your home is bookmark about Magazine bookmarked by corey with ID 13128068142 was uploaded on 07-01-2019 and has been viewed 228,104 times.
Accent Mirror Start by selecting your wood, as listed in the materials list.I built this one out of red oak, but you can use your favorite wood with similar results.Cut the 60-degree ends on the pieces that will make up the arch as shown in the drawing.
A mitre saw is the preferred tool for this task, but a table saw, or mitre box will do the job too.Join the three pieces together permanently, in preparation for cutting the curve.I used a pocket hole jig, screws, and glue.
If you prefer, you can use dowel pins, small biscuits, or a spline, for equivalent strength.Cut the centre hub of the mirror with a band saw, scroll saw, or jigsaw, and finish-sand it.Prepare the bottom 24' board and finish-sand.
Glue the hub to the bottom board, being careful to contain glue squeeze-out.Now it's time to draw the arch.Place the bottom board, with the hub attached to it, against the bottom of the three-piece assembly.
Centre it on the assembly, and fasten it there with the pocket screws.If you are not using pocket screws, prepare the joint as you need but don't glue it together.Clamp it down...