Home Project This Easy To Make Project Will Teach You Some Basic Upholstery Techniques It Will Also Give You Place To Put Your Feet Up After A Busy Day And Read Some Of The Magazines Stored Inside The Stool
Home project this easy to make project will teach you some basic upholstery techniques it will also give you place to put your feet up after a busy day and read some of the magazines stored inside the stool is article about Magazine bookmarked by andre with ID 13637231876 was uploaded on 30-03-2019 and has been viewed 207,136 times.
Build an Upholstered Foot Stool Photos by Mark Rose; Illustration by James Provost When making the legs, it's best to choose a hard, straight-grained wood so it will match nicely after the mitres are cut and the halves are glued together.
It's easiest to mitre the leg parts then glue them up in one blank before cutting four legs out of the length.A 36" long board will be mitred in two, giving you mating, mitred parts.Machine the wood to 1" x 6-1/2" x 36" long.
Put a sharp blade on the table saw and tilt the blade to exactly 45 degrees.The fence should be set at 2-1/4" from the inside of the 45 degree angle, in order to split the blank in half.If you're a little large, don't worry, as the exact leg profile will be shaped later.
Make your cut as even as possible and keep the wood from lifting off the saw table, as this newly cut surface will become your gluing edge.If you're having problems getting a good finish off the blade, move the fence in a hair and take a light skim cut or run the pieces over the jointer with the fence...