Turning Project If You Like Wine And Pizza This Turning Project Is For You Fire Up The Lathe Then Get Ready To Uncork The Wine
Turning project if you like wine and pizza this turning project is for you fire up the lathe then get ready to uncork the wine is bookmark about Magazine bookmarked by edward with ID 1591128059 was uploaded on 04-02-2019 and has been viewed 256,813 times.
Turn a Corkscrew and Bottle Stopper Combo Photos by Gavin Villa; Lead photo by Rob Brown INFO: DIFFICULTY - 2/5, LENGTH/TIME - 2/5, COST - 2/5, SPECIAL TOOLS - KITRequired accessories:• 7 mm long mandrel• 3 pc bushing set (#BS6-BU)• 7 mm drill bit (#PK-7mm)• Barrel trimmer system (#PKTRIMKIT)• Two-part epoxy glue or cyanoacrylate glue Learn more about the corkscrew bottle stopper kit here:penblanks.
ca/instructions/english/BS7-THandleStopper.pdf I was able to get all the supplies for this T-handle bottle stopper from William Wood-Write (penblanks.ca), which saved me a lot of grief.Though I picked up a stainless steel bottle stopper kit and a deluxe jumbo pizza cutter kit as well, they were too simple to make to include in this article.
If you order through their website, be sure to click on the 'Related Products' tab and it will list the required bushing set, 7 mm bit, and 7 mm mandrel shaft.You're going to need two blanks of the wood of your choice that are at least 3/4" square and 2" long.
This is a perfect project for that piece with the wild grain you tucked up in your secret stash (yeah, you know the one I'm talking about).I chose a piece of zebrawood.Cut the blanks to sizeTo start, cut two blanks...