Resawing On The Bandsaw
Resawing on the bandsaw is article about Accessories bookmarked by greg with ID 11674784884 was uploaded on 18-01-2019 and has been viewed 386,887 times.
Synopsis: Ronald Volbrecht makes guitars from extremely rare hardwoods.When it's time to resaw these irreplaceable planks, he doesn't want anything to go wrong.Over the years, he learned how to adjust his bandsaw for consistent results with little waste.
He can get 3/32-in.-thick guitar backs from resawn boards that are only 1/8 in.thick.In this article, he tells how to upgrade your motor and pulleys, how to choose a good blade and keep it tight, how to set the speed, and how to tighten adjusting screws and set the fence.
He feeds the stock in slowly and supports it.A side article by Anatole Burkin of Fine Woodworking explains how two tool manufacturing representatives advise maintaining and using a bandsaw...