Spray finishing is post about Magazine bookmarked by jerry with ID 11056622068 was uploaded on 04-03-2019 and has been viewed 340,979 times.
Spray Finishing - Tips for Getting Started Before you spray • Maintain a temperature of 17-25°C and don't spray if the humidity is very high.• Use ample lighting and have it come from a number of directions.
For best colour rendition, use daylight-balanced tubes in your fluorescent fixtures.• Spraying outdoors - because there is little overspray with HVLP spray units, working outdoors might be a good option, if weather permits.
Spraying outside is also more appropriate when spraying low VOC materials.• Indoors - best to work in an enclosed area - booth, room or draped-off area.Sweep and clean the area well before spraying.• Cover tools, machinery, etc.
with drop cloths before spraying.• Use a turntable and keep the piece at a comfortable height while spraying.• If you're spraying smaller pieces or furniture parts, use a number of riser blocks to hold the piece off the main turntable surface.
• Spraying furniture sub-assemblies is much easier than finished pieces of furniture; even if you are able to remove the back from a cabinet, your finishing job will go much smoother.• Follow the manufacturer's instructions for spray equipment and finishing materials.
• Heaters - don't spray flammable material around heaters, furnaces, etc.that have an...