Shop Skills It Sure Is Nice When You Learn A Simple Easy Way To Improve Your Accuracy When Building Furniture We Have 13 Of These Great Little Tips To Share With You Here
Shop skills it sure is nice when you learn a simple easy way to improve your accuracy when building furniture we have 13 of these great little tips to share with you here is bookmark about Magazine bookmarked by jimmie with ID 13563874262 was uploaded on 13-03-2019 and has been viewed 47,132 times.
13 Simple Ways to Improve Accuracy Photos by Chris Wong 1.Use Calipers or an Etched Rule - Set your marking gauge using an etched rule or a caliper.Setting the marking gauge freehand can lead to mistakes.
With a rule, the cutting wheel sits securely in the etched marking of the rule and the fence is brought up against the end of the rule.You can often get as accurate as 1/64", depending on the type of rule you're using.
With a caliper the cutting wheel is set against the end of one jaw, and the fence is slid until it registers on the end of the other jaw.2.Check Your Cuts - When setting up machinery, check your test cuts, not just your setup.
For a host of reasons, the part that is freshly cut may not be the exact same dimension as the fence width indicates.Always measure twice, cut once, then measure one final time.And just because layout tools indicate the blade is set at 45 degrees to the fence doesn't necessarily mean that the cut will also be 45 degrees.
3.Saw Notch - Cut V-notches with a marking gauge or knife, followed by a chisel to...