How To Make A Wood Mallet
How to make a wood mallet is article about Shop Projects bookmarked by marvin with ID 14130175065 was uploaded on 23-04-2019 and has been viewed 245,396 times.
The Making of a Wood Jointers Mallet Making a wood mallet is a quick an easy woodworking project anyone can do with some basic woodworking tools.For this project I decided to use some fancy leftover coconut palm wood but any wood will do.
I begin by cutting the hammer head to 5.5″ long, 2″ tall out of 1.5″ thick stock.I then drill a 1″ hole completely through the top as this will hold the handle tenon.The handle is cut to 11.5″ in length and turned on the lathe.
The tenon should fit easily into the hammer head mortise and then split down the middle on the bandsaw.This will allow me to make a wedge that will hold everything together very snug with wood glue.For aesthetic reasons I wrapped the handle with baseball bat tape and tapered off the ends of the hammer head.
And just for fun I laser engraved MC Hammer on one side and the phrase 'Please Hammer' on the other referencing the hit album 'Please Hammer Don't Hurt 'Em.' Combination SquareTape MeasureFestool Miter SawForstner Bit SetJet Drill PressTable SawScrewdriver SetJet LatheDigital CalipersDust MaskFace ShieldGrizzly BandsawTitebond Wood GlueRubber MalletSliding T-BevelFestool Random Orbit SanderLaser CutterMixwax Spray LacquerBat...