Dining cart is post about Plans bookmarked by ryan with ID 12202553421 was uploaded on 26-02-2019 and has been viewed 185,965 times.
Dining Cart Rustic, yet industrial dining cart, see more about the project at decorandthedog.net/decorandthedog/2014/1/19/diy-dining-cart-tutorial HANDMADE FROM THIS PLAN >> Projects built from this plan.
Thank you for submitting brag posts, it's appreciated by all! Handmade by: lisacarson84Shopping List: 8 - 2"x4"x8' 2"x3" - Only need 28", so get the smallest one possible, or rip a 2"x4" down 2 - 3/4" x 6' black iron pipe 4 - black iron end caps 4 - industrial wheels 2 - corner brackets 2 1/2" pocket hold screws Kreg jig wood glue Construction adhesive (we use Loctite Power Grab) Black spray paint Small nails or upholstery tacks General Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections or debris.Always use straight boards.
Check for square after each step.Always predrill holes before attaching with screws.Use glue with finish nails for a stronger hold.Wipe excess glue off bare wood for stained projects, as dried glue will not take stain.
Be safe, have fun, and ask for help if you need it.Good luck! Dimensions: 48" Wide, 34 1/4" Tall, 14" DeepCut List: 2"x4" 4 - 30.5" (sides) 6 - 45" (outsides of...