Pub Table With Cooler And Logo S
Pub table with cooler and logo s is article about Plans bookmarked by bruce with ID 12015843690 was uploaded on 20-03-2019 and has been viewed 170,413 times.
Pub Table with cooler and logo's Liked the idea of the patio table with cooler but wanted something little smaller and taller as I building some high back pub chairs to match.I also really like Fireball Whiskey so decided to incorporate into the table.
I am also planning on going by autozone as they have thin striped red led lighting that I am going to adhere to the planter box so when filled with ice it will look red.So cool! HANDMADE FROM THIS PLAN >> Projects built from this plan.
Thank you for submitting brag posts, it's appreciated by all! Add your project.Author Notes: inspired by the patio table with built in cooler on this site Shopping List: 4- 2x4x82 - 4x4x83 - 2x6x8 scrap 2x8 @ 23 3/4 2 scrap 3/4" plwood 5" x 24 2 scrap 3/4" plywood 4" x 12" kreg screws 2 1/2kreg screws 1 1/4 1-1/4" Pocket Hole Screws2-1/2" Pocket Hole ScrewsElmer's Wood Gluewood conditionerTools: Tape MeasureSpeed SquareCarpenter's PencilHammerKreg JigDrillCompound Miter SawTable SawBrad NailerPower SanderLevelGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections...