Plunge Router Slotting Jig
Plunge router slotting jig is article about Casework bookmarked by bill with ID 11709690497 was uploaded on 23-02-2019 and has been viewed 124,534 times.
I build cabinets for audio, video and computer equipment.Each cabinet must be equipped with different-size access slots, depending on the equipment to be stored.To cut the various lengths of slots required, I came up with the router jig in the sketch.
The jig, which I've found saves time and gives good results, is based on the two interlocking, identical parts cut from 3/8-in.-thick plywood.A block glued to each U-shaped component aligns the pieces as they slide together.
For best results, the pieces must fit together snugly...