Cottage Hutch For The Cottage Media Console
Cottage hutch for the cottage media console is post about Plans bookmarked by robert with ID 13829546977 was uploaded on 25-01-2019 and has been viewed 109,643 times.
Cottage Hutch for the Cottage Media Console A very simple tv console featuring two drawers and one large shelf.HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Add your project.
The Cottage Hutch works with the Cottage Media Console.It is fully customizable to fit any flat panel that is under 44" wide.You can also make yours narrower by simply using a narrower width board Shopping List: 2 - 1×12 boards, 10 feet long1 - 1×12 board, 4 feet long(optionally you could use 1 sheet of plywood cut into strips 11 1/2″ wide or the desired width of your hutch)1 sheet 1/4″ plywood, beadboard, paneling (for the back)1 - 1×4, 8 feet long5 - 1×2 Boards, 8 feet Long2″ Screws or 1 1/4″ Pocket Hole Screws2″ Finish Nails1 1/4″ Finish Nails1″ Finish Nails (you only need a few, screws work too)Wood GlueWood Filler120 Grit Sand PaperPrimer, Paint and StainTip Resistant Kit Tools: Tape MeasureSpeed SquareCarpenter's PencilHammerSafety GlassesHearing ProtectionDrillCircular SawPower SanderDrill Bit SetDimensions: Dimensions: 49″ wide x 54″ tall x 13″ deep.
Can be modified to fit needs.Cut List: 2 - 1×12 @ 53 1/4″ (Sides)1 - 1×12 @ 46″ (Top)2 - 1×12 @ 44 1/2″ (Shelves)1 - 1/4″...