Ana S Slipper Chair
Ana s slipper chair is post about Plans bookmarked by glenn with ID 13198580951 was uploaded on 07-04-2019 and has been viewed 136,467 times.
Ana's Slipper Chair A few years ago, Ana posted a drawing of a slipper chair on the Knock-Off Wood Facebook page.She hadn't had time to create the plans.I wanted to build the chair so I hacked Ana's drawing and created plans for it! HANDMADE FROM THIS PLAN >> Projects built from this plan.
Thank you for submitting brag posts, it's appreciated by all! Handmade by: moosmaniAuthor Notes: The only change I made to Ana's drawing was to lengthen the back so it was taller (and i could rest my head on it while relaxing!).
The chair is upholstered before it is assembled and although I didn't take pictures of the upholstery process, it is very easy to do! Shopping List: 1 - 2x2 at 6'3 - 2x4 at 8'1 - 2x6 at 8'Half sheet of ¼' lauan or hardboard2-1/2' pocket hole screws1-1/4' brad nails4 - 4' carriage bolts with nuts8 - fender washers1' upholstery foam5' upholstery foamUpholstery battingFabricUpholstery tacks 2-1/2" Pocket Hole ScrewsElmer's Wood GlueElmer's Wood Filler120 grit sandpaperprimerpaintpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionKreg JigDrillCircular SawJigsawCompound Miter SawTable SawBrad NailerPower SanderStaple GunGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section....