Chevron Patterned Dining Table Top
Chevron patterned dining table top is post about Plans bookmarked by kent with ID 1717214828 was uploaded on 12-03-2019 and has been viewed 150,827 times.
Chevron Patterned Dining Table Top Build your very own wood patterned table top! HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: anastacia_elon Handmade by: katieclapp For more information visit:diy-my-homes.
com/stunning-purebond-plywood-dining-table/ Shopping List: (1) 4x8' sheet of 3/4" PureBond Plywood (cut to size 40"x80" at HomeDepot)(3) 8' long 1x3s (we chose Red Oak, but Pine would be fine too) for the frame(4) 1/2" thick sheets of 2'x4' plywood (we used various species)A mix of Minwax water based express color stains 1 1/4 inch finish nailsElmer's Wood GlueTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionCircular SawCompound Miter SawTable SawPower SanderGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections or debris.Always use straight boards.
Check for square after each step.Always predrill holes before attaching with screws.Use glue with finish nails for a stronger hold.Wipe excess glue off bare wood for stained projects, as dried glue will not take stain.
Be safe, have fun, and ask for help if you need it.Good luck! 40"...