C*Rnh*L* Boards And Bags
C*rnh*l* boards and bags is post about Plans bookmarked by alfredo with ID 13659874286 was uploaded on 11-03-2019 and has been viewed 194,946 times.
C*rnh*l* Boards and Bags Custom 2' x 4' C*rnh*l* boards with hand painted art work HANDMADE FROM THIS PLAN >> Projects built from this plan.Thank you for submitting brag posts, it's appreciated by all! Handmade by: djsaffer19 Handmade by: straitiffcustom.
Shopping List: 2 - 1/2 or 3/4 Plywood 2'x4'4 - 2 x 4 x 8 2-1/2" Pocket Hole ScrewsElmer's Wood Gluewood conditionerpaint brushTools: Tape MeasureSpeed SquareCarpenter's PencilSafety GlassesHearing ProtectionKreg JigDrillCircular SawJigsawTable SawPower SanderLevelGeneral Instructions: Please read through the entire plan and all comments before beginning this project.
It is also advisable to review the Getting Started Section.Take all necessary precautions to build safely and smartly.Work on a clean level surface, free of imperfections or debris.Always use straight boards.
Check for square after each step.Always predrill holes before attaching with screws.Use glue with finish nails for a stronger hold.Wipe excess glue off bare wood for stained projects, as dried glue will not take stain.
Be safe, have fun, and ask for help if you need it.Good luck! Dimensions: Cut List: to follow Cutting Instructions: to follow Preparation Instructions: Fill all holes with wood filler and let dry.Apply additional coats of wood filler as needed.
When wood filler is completely dry, sand the project in the direction of the...