Diy Rustic Coat Rack From Tree Branches
Diy rustic coat rack from tree branches is article about How To bookmarked by johnny with ID 1841399509 was uploaded on 01-02-2019 and has been viewed 212,425 times.
This project is something you can tackle in a very short amount of time with no money at all (assuming you have an extra piece of wood trim).Who wouldn't want an amazing tree branch coat rack in their man cave or some other outdoorsy area/decor theme? What You'll Need Approximately 12 branches, at least 10 inches long7 ft.
piece of wood trim, 1 x 4 is shown below (this will be the frame)Wood glue (here's the best)Hand saw or circular saw (to cut branches)8, 2 inch screwsCordless Drill (can be corded too, this is just preference)About 30 trim nailsSanding sponge Without further ado, let's jump into the tutorial which comes from Buildipedia via Youtube.
1.Locate Branches The branches you choose will ultimately become the things that you hang your coats on, so be sure to get some that have smaller limbs hanging off to the side, as shown above.It's important to work with branches that are sturdy and dry - not something brittle that will break when a heavy coat is hung on it.
For the rack frame, find a piece of wood trim like an old baseboard made out of real wood - 1 x 4 could work.2.Measure Your Space The cool thing about...