How To Build A Folding Sawhorse Quick And Easy
How to build a folding sawhorse quick and easy is bookmark about How To bookmarked by randall with ID 11427036461 was uploaded on 23-03-2019 and has been viewed 152,560 times.
For the *m*t**r or the professional woodworker, a good pair of sawhorses is an essential element to any project.Steve Ramsey of Woodworking For Mere Mortals takes the simple task of making your own sawhorses one step further.
The only real problem with basic sawhorses is they take up a lot of room in your shop or garage.This simple folding sawhorse design from Steve is very easy, quick, and will solve the storage problem basic sawhorses cause.
The best part, you only need two 2x4x8's to build each sawhorse (not including the shelf). Let's get started! What You'll Need2 - 2x4x8's1 - 1/2 inch 4×4 Sheet of Plywood2 1/2 inch Screws2 - 3 inch Strap Hinges (with screws)4 - 2 inch x 1/2 inch DowelsCordless Drill Miter Saw or Table SawBand Saw or JigsawWood Glue Table of Contents [show] 1.
Cut The 2x4x8's Like I said earlier, you only need two 2x4x8's for each sawhorse.The best way to start is to cut all of your base material in the beginning.Sawhorse Base 2x4x8 number one…cut into 3 equal lengths at 31.
5 inches.2x4x8 number two…cut one piece at 31.5 inches, and one piece at 48 inches.The Shelf The remaining section of 2x4x8 number two will need to...