Rolling Clamp Rack
Rolling clamp rack is post about Shop Blog bookmarked by shane with ID 13323181096 was uploaded on 16-04-2019 and has been viewed 190,598 times.
This rolling clamp rack holds about 50 clamps, takes up minimal floor space and can be built in an afternoon.Rolling clamp rack.When you've got so many clamps that it's a problem getting them to where the work is being done, build this rolling clamp rack! It holds about 50 clamps, takes up a little more than four square feet of floor space and can honestly be built in an afternoon.
The construction of the frame is simple, but the 'hanging' part of the rack depends a great deal on the type and variety of clamps you own.Rolling Clamp Rack Construction Cut the ends of the four uprights and the two base support pieces at a 10-degree angle as shown.
Assemble the two side frames by scr*w*ng two cross supports between the pairs of uprights, holding the top inside edge of the support flush to the inside of the upright, and flush to the top or bottom 10-degree angles.
Attach the two frames together to form the 'A' by scr*w*ng the base supports and the top supports to the sides of the frames, holding them flush to the bottom and top of the frames.Now attach the casters to the outside ends of...