A Visit To Takuji Matsuda S Kiribako Shop Part 3 Mitering Techniques
A visit to takuji matsuda s kiribako shop part 3 mitering techniques is article about Shop Blog bookmarked by antonio with ID 12809699333 was uploaded on 14-04-2019 and has been viewed 325,746 times.
Although Takuji owns a miter saw but he likes to use a miter trimmer for the final adjustment of his miters.He uses a two blade mitering trimmer which, if placed in the conventional (manufacturer recommended) position, enables him to process workpieces up to 4' or so wide.
But he is also able to slice away much wider parts once his homemade mitering ramp is deployed.He built this ramp from plywood and clamps it to the bed of the mitering trimmer.Another mitering trick that I learned from Takuji is to wet the end grain of the miter with water before severing their fibers.
This softens the fiber and makes the slicing operation effortless.The softer fibers will extend the time between sharpening - the blades are extremely heavy and difficult to sharpen.This is the traditional way in which a mitering trimmer is used.
The workpiece is held upright.By wetting the end-grain with water the blades are able to slice the wood faster and with less resistance.After clamping his homemade mitering ramp Takuji is able to miter much wider parts.
We have an identical mitering trimmer in our woodworking program, which I find very handy for trimming accurate miters in boxes and...