Flatten Wide Boards On A Narrow Jointer
Flatten wide boards on a narrow jointer is article about Lumber Materials bookmarked by alberto with ID 13185337297 was uploaded on 03-03-2019 and has been viewed 57,138 times.
Synopsis: In most home shops, there is a mismatch between the capacity of the jointer and planer-mostly because wide jointers are expensive.Working in a shop with a 12-in planer and a 6- to 8-in.jointer limits the width of boards you can mill to the smaller size.
This technique can help.The secret is a wide, shallow rabbet cut on the jointer, and a spacer that is used on the planer.Follow these instructions, and you'll be able to stretch a 6-in.jointer's capacity to 9 in.
, and an 8-in.jointer's capacity to 12 in...