Making A Steambox

Making A Steambox Shaping

Making a steambox is bookmark about Shaping bookmarked by daniel with ID 159089951 was uploaded on 03-02-2019 and has been viewed 140,828 times.

This steambox is made with a liquid propane gas cooker, a common 5-gal.metal paint can (scrubbed clean), a closet fl*ng* (the plumbing fixture for mounting a toilet onto the floor) and a length of 4-in.

PVC pipe.Bolt the metal closet fl*ng* to the lid of the can, and drill numerous holes through the lid within the circumference of the collar.Set the PVC pipe on the collar to make a chamber for the wood being steamed.

Because I steam mostly chair posts and strips for Shaker boxes, I cut the PVC pipe 48 in.long.But you can vary the length of the tube to suit the workpiece.While the steambox is working, I set a PVC end cap loosely over the tube...

Read More →

Disclaimer: images, articles or videos on this website sometimes come from various other media sources. Copyright is fully held by the source. If there are problems related to this, you can contact us on this page.
Bookmark ID: 159089951

Making a steambox is just one of the many collections of bookmark on this website. There are approximately 216 posts that exist in our database associated with this article. Here are the details of "making a steambox" article:

Category:
Title:
Image URL:
Post URL:

This is a article related to making a steambox, there are approximately 216 bookmark related to this shaping category. Please see the details below and click on the title for more information..

Jig For Making Beveled Notches Accessories 150 x 100

Jig For Making Beveled Notches

For a recent production run of toys, I had to cut several beveled notches on each toy.My first thought was to use a simple beveled block attached to my miter gauge that would tilt the workpiece at the appropriate angle for a dado-blade cut.But then I realized I'd have to ... Jig for making beveled notches is article about Accessories bookmarked by chris with ID 14172524599 was uploaded on 08-04-2019 and has been viewed 221,427 times.

Tablesaw Jig For Making Scarf Joints Accessories 150 x 100

Tablesaw Jig For Making Scarf Joints

The scarf joint, which joins stock lengthwise without loss of strength, deserves more recognition outside its traditional domain of wooden boatbuilding.Here's how I make the joint for other woodworking projects Tablesaw jig for making scarf joints is article about Accessories bookmarked by ricardo with ID 11438919983 was uploaded on 06-03-2019 and has been viewed 172,375 times.

Making A Safer Taper Jig Accessories 150 x 100

Making A Safer Taper Jig

You can make a shop-built tablesaw taper jig safer and easier to use by adding a 1/8-in.-thick plywood or Masonite shelf to the bottom, and a hold-down clamp and a handle to the top.The shelf-and-hold-down combination holds the workpiece snugly enough to eliminate the balancing act that usually accompanies cutting ... Making a safer taper jig is post about Accessories bookmarked by nathan with ID 12650708198 was uploaded on 04-01-2019 and has been viewed 299,229 times.

Making Sectional Molding Accessories 150 x 100
Making Sectional Molding

Sectional molding for cabinet doors is easy to make on the tablesaw and lathe.Cut the straight sections on the tablesaw with a molding head.To make the semicircular section at each corner, remove the cutter from the molding head and bolt it to a heavy strap-iron handle.This provides a scraping tool ... Making sectional molding is bookmark about Accessories bookmarked by ricardo with ID 1965076348 was uploaded on 15-01-2019 and has been viewed 371,559 times.

Making Dowels With The Tablesaw Accessories 150 x 100
Making Dowels With The Tablesaw

I prefer to make my own dowels for several good reasons.I can make any size dowel in any length from any wood.My system is simpler and certainly less expensive than the commercial dowel-making tools that are limited to only a few sizes.The drawings show the complete tooling required: a hardwood ... Making dowels with the tablesaw is post about Accessories bookmarked by roger with ID 13153668128 was uploaded on 05-01-2019 and has been viewed 75,310 times.

Joint Making Machines Accessories 150 x 100

Joint Making Machines

Synopsis: Why buy a factory-made jig to make mortise-and-tenon joints when you can make serviceable alternatives? Michael Standish reviews several brands to justify the use and cost of buying them for even small-scale production work.Before taking the plunge yourself, check out his tests to see which jig serves your needs ... Joint making machines is bookmark about Accessories bookmarked by dwight with ID 13239142164 was uploaded on 07-04-2019 and has been viewed 419,027 times.

Making Sense Of Motors Accessories 150 x 100

Making Sense Of Motors

Synopsis: When you see terms like 'maximum' or 'peak' horsepower, watch out, Martin Seifert says.Those terms aren't complete lies, but they're not useful.Woodworking machines aren't meant to be pushed to near meltdown.Look at the fine print and do a little math when shopping for motorized tools.Seifert explains what affects power ... Making sense of motors is bookmark about Accessories bookmarked by troy with ID 12318316100 was uploaded on 02-02-2019 and has been viewed 123,968 times.

Making Wood Look Old Accessories 150 x 100

Making Wood Look Old

Synopsis: Wood looks better as it ages, writes finisher Jeff Jewitt.He often has to match an old look when fabricating missing parts for antique furniture, and in this article, he explains how he does it.He matches the original surface texture, such as tool marks, first, and pays attention to patina.Dyes, ... Making wood look old is article about Accessories bookmarked by lance with ID 14144108509 was uploaded on 02-04-2019 and has been viewed 396,134 times.

Making A Case For Varnish Accessories 150 x 100

Making A Case For Varnish

Synopsis: Frank Pollaro wanted to give a complex piece he'd just completed a more protective finish than French polishing affords.Using the technique he explains here, you can brush on varnish and get a deep, clear and brilliant finish that looks sprayed-on.He introduces the article with information about varnish and how ... Making a case for varnish is bookmark about Accessories bookmarked by frank with ID 13924655450 was uploaded on 13-03-2019 and has been viewed 248,377 times.

Making A Sheraton Bed Beds 150 x 100
Making A Sheraton Bed

Synopsis: The posts on this bed are the toughest part; after that, says Philip C.Lowe, the rest is simple.Lowe makes full-scale drawings for his projects, and he shares tips on doing so on this job.He explains how to make the blanks for the bedposts, how to turn and reed the ... Making a sheraton bed is article about Beds bookmarked by brandon with ID 1879525932 was uploaded on 31-01-2019 and has been viewed 254,307 times.

Making A Steambox Shaping 150 x 100
Making A Steambox

This steambox is made with a liquid propane gas cooker, a common 5-gal.metal paint can (scrubbed clean), a closet fl*ng* (the plumbing fixture for mounting a toilet onto the floor) and a length of 4-in.PVC pipe.Bolt the metal closet fl*ng* to the lid of the can, and drill numerous holes ... Making a steambox is bookmark about Shaping bookmarked by alfredo with ID 159089951 was uploaded on 03-02-2019 and has been viewed 140,828 times.