A Groovy Way To Put The Squeeze On Glue Squeeze Out
A groovy way to put the squeeze on glue squeeze out is post about Wood And Supplies bookmarked by walter with ID 11797615166 was uploaded on 20-03-2019 and has been viewed 264,415 times.
Removing excess glue when assembling parts is messy and risky.If you leave the slightest residue, it can seal the wood and block stain penetration, resulting in a blotchy finish.Here's a simple way to avoid the problem.
Cut [fraction "1" "8"]" grooves [fraction "1" "8"]" deep [fraction "1" "8"]" from a part's edges on its glue surface, where shown at above right.Then, apply glue to the area between the grooves, and clamp the part in place.
The grooves will capture the excess glue, preventing it from oozing beyond the part's edges...